Installing Your Dension Gateway Lite Ipod Car Kit – Simple Tips

With a suitable car kit, you can actually bring your iPod to your car and play the music conveniently. Some people will think that it is troublesome for them to play the music in cars because they have to use USB to do so. They use iPod to listen to songs every day and they want to use iPod to play the songs in cars so they do not need to update their music USB all the time, which is very time-consuming.

Yes, in the article, we are trying to tell you something about the installation of the iPod car kit from this brand. If you are using other brands, some of the steps may still be useful for your installation. You can still take this article as a reference.

The first step for your installation of iPod car kit is that you should remove your original car stereo. This means that you need some suitable removal tools for the process. But the type of tools needed may vary with the type of vehicles owned by you. You should try to take a look at the manual of the car kit and get the possible help.

After you successfully remove the car stereo, you can go on to remove the harnesses from the stereo. Many vehicles will use Quadlock connection for the harness. If you cannot find such connection, you can use the Gateway Lite Harness to fit it into the CD port of changer. This port is usually at the top right part of the stereo and you should find it easily. You can connect it simply. If there is Quadlock, directly replace it with the Gateway one.

Secondly, you can remove the harnesses which are located at the back of your car stereo. Usually, there is a Quadlock connection. You can obviously find it because it is large in size. If you use the Dension product, you can replace the harness exactly.

After that, you need to remove the harness from your stereo’s back. Usually, the vehicles will have a connection called the Quadlock connection. This is a large block which can be seen clearly. You can directly replace it with the Dension harness. If your car stereo does not have this Lock, you may need to look for the CD changer port, and connect your harness with it.

Then, you will need to route the cables well. You have to make everything tide in your car. This is something troublesome to male drivers because they will think that this is something that poses problem to them. They do not like to spend time routing the cables. But if you do not do this right, the cables will easily be damaged and you will need to waste money all the time for replacing the cables.

The final step is to replace your car stereo into its fittings. You can read the manual and get the idea of how to finish every step conveniently. In fact, the manual is usually helpful and you should never throw it away even though you finish the installation of your car kit. It is because some years later you may need to change something in the stereo and you will need to reconnect everything and the manual will help. Wish you a successful installation for your lovely iPod car kit.

The Author is a passionate ne tworker and shares the iPod, USB adapter site where you can find out all about Adapter. and what it can do for you.

This entry was posted on Tuesday, June 29th, 2010 at 9:58 am and is filed under iPods. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.